The LUXBEAM® RAPID SYSTEM (LRS)* is a DLP® based stereo lithography sub-system designed for additive manufacturing of high resolution parts.
The LRS can be configured in 2 ways:
1) for stand still projection, as typically used in rapid prototyping / manufacturing.
2) for combining the LRS with a synchronised and controlled motion system for scrolling
over a larger area and keep the resolution or even increase it.
The LRS thoroughly support large scale manufacturing of many equal parts at high speed. The LRS uses the advantage of a moving photo head to create a large build area and enables smart functions like Subpixelation (SPX) for resolution enhancement, and Pixel Power Control (PPC) ensuring equal amount of energy to each pixel in the resin.
The system includes an UV LED light source which in combination with the robust and reliable DLP® technology provides a system with long life time and low maintenance cost. The LRS is configurable and is available in single or multi head configuration to fit the needs for throughput and build area in the machine. The already proven and reliable LRS is a plug and play system/module that will enable customers to design, build and brand a Rapid Manufacturing machine with a very short time to market and with low technical risk.
The LRS will provide a system capable of 25µm in XYZ resolution in combination with 10 - 20 cm width of build area and a customer defined length in the motion direction, - typical 1 meter. Other configurations with higher or lower resolution can be configured via dedicated lens design.
Our reference Lithography machine is available for demonstration and test manufacturing of samples for evaluation of single layer 3D perfomance and throughput.
Samples can be ordered through Visitech Contact.
(*) Patented and patents pending.
Download brochure at: Luxbeam_4_sider_A4_rev2_1113_lowres.pdf
Download data sheet at: Datablad_Luxbeam_Rapid_LRS_lowres.pdf